Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they do not rust or rot.

Cleaning and lubricating regularly UPVC windows and doors is vital. This will help prevent costly repairs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows, it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have double-paned windows that are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this case it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you're planning to attempt to remove the window panes by yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also an excellent idea to lay down a drop cloth prior to when you start working on the glass to ensure that any fragments of glass fall onto the fabric rather than on the floor, where they could be trodden under and cause further damage.

After the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop water and Upvc Window Repairs drafts from getting into the property until a professional comes out and repair the window. It also acts as a barrier to prevent any criminals from getting into your home. If the gap is particularly large, you may want to consider using a security door that has an integrated window, since it offers the best of both worlds.

2. Sagging

Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. However, over time they are susceptible to a range of problems including sliding. A sagging window in uPVC can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows so you can access the frame. After that, using the screwdriver, you'll be able to remove the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you've relocated your hinges. If you're satisfied with the fit of your window, you can tighten screws to secure them in place.

If you cannot reposition the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is important to replace your seal as quickly as you can to ensure that your uPVC window waterproof and draughtproof.

uPVC handles can also loosen up. This is usually due to screws that have become undone over time, but it can be due to the handle mechanism wearing out. Fortunately, it's easy to repair a loose uPVC window handle yourself. First, you'll need to shut the window and do an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't, you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's important to take action. Water leaks through windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be done by any DIYer who has the ability. Based on the severity of the issue the caulking used previously may need to be removed before a new layer can be put on. It is important to remember that when it comes to uPVC window repairs, you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce your energy efficiency.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more severe situations, you may have to replace the window.

Mold spots and rotten sills are also signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the home.

It is also important to note that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges could be at fault when your upvc window repairs window is difficult to open or if it blows open with the breeze. These are easily repaired by any DIYer who is skilled and can usually be done within a few minutes.

Like any mechanical component, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a simple procedure, but it is easier when you have a person to help you hold the frame in place.

It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.

The issue can be caused either by opening the window incorrectly or by a poor installation in the factory. Sending us photos through our website can often resolve the problem. We are happy to give advice.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It can also lower the chance of windows sticking and prevent corrosion. This should be done at least every year. WD40 and other solvent-based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts can be caused by different factors. The hinges can also become misaligned due to wear, which can cause an opening between the frame and sash. They can be repaired by giving them a good cleaning, but when they're beyond repair, it could be necessary to have them aligned or replaced. The interlock may be misaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances it might be necessary to replace them.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will reduce draughts.

The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. They will help keep cold air out and keep your home warm and cozy!

With a little maintenance and repairs your windows made of upvc will continue to provide an excellent level of insulation and security for your home. It is crucial to realize that all windows have a lifespan and there may come a point where it is more cost-effective to replace them rather than fix them. If you have any problems with your Upvc window it is recommended to speak with an expert immediately.